해당 장비 버전
C7609#show ver
Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 15.1(3)S4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Wed 01-Aug-12 17:03 by prod_rel_team
ROM: System Bootstrap, Version 12.2(33r)SRE, RELEASE SOFTWARE (fc1)
BOOTLDR: Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 15.1(3)S4, RELEASE SOFTWARE (fc2)
WR_SA_YCORE_C7609_2 uptime is 1 day, 19 hours, 24 minutes
Uptime for this control processor is 1 day, 19 hours, 24 minutes
System returned to ROM by reload (SP by reload)
System restarted at 17:34:41 KST Sat Feb 2 2013
System image file is "sup-bootdisk:c7600rsp72043-adventerprisek9-mz.151-3.S4.bin"
Last reload type: Normal Reload
Last reload reason: power-on
7609 장비에 해당 컨피그 적용시 나오는 warning 메세지
WR_SA_CORE_C7609_4(config)#mls ip multicast replication-mode ingress
Warning: The above command is going to be deprecated. Use ip multicast hardware-switching replication-mode ingress instead.
Warning: This command will change the replication mode for all address families.
위의 컨피그가 적용되어 있을 시에는 redundancy mode 가 sso 로 설정해 놓아도 rpr로 동작함
WR_SA_YCORE_C7609_1#show redundancy
Redundant System Information :
------------------------------
Available system uptime = 1 hour, 32 minutes
Switchovers system experienced = 0
Standby failures = 3
Last switchover reason = none
Hardware Mode = Duplex
Configured Redundancy Mode = sso
Operating Redundancy Mode = rpr Reason: Software mismat
Maintenance Mode = Disabled
Communications = Up
Current Processor Information :
-------------------------------
Active Location = slot 5
Current Software state = ACTIVE
Uptime in current state = 1 hour, 32 minutes
Image Version = Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 15.1(3)S4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Wed 01-Aug-12 17:03 by prod_rel_team
BOOT = sup-bootdisk:c7600rsp72043-adventerprisek9-mz.151-3.S4.bin,12;
CONFIG_FILE =
BOOTLDR =
Configuration register = 0x2102
Peer Processor Information :
----------------------------
Standby Location = slot 6
Current Software state = STANDBY COLD
Uptime in current state = 0 minutes
Image Version = Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 15.1(3)S4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Wed 01-Aug-12 17:03 by prod_rel_team
BOOT = sup-bootdisk:c7600rsp72043-adventerprisek9-mz.151-3.S4.bin,12;
CONFIG_FILE =
BOOTLDR =
Configuration register = 0x2102
##### ip multicast hardware-switching replication-mode ingress 커맨드로 컨피그 적용 시에는 정상 동작 #####
WR_SA_YCORE_C7609_1#show redundancy
Redundant System Information :
------------------------------
Available system uptime = 1 day, 19 hours, 23 minutes
Switchovers system experienced = 2
Standby failures = 0
Last switchover reason = user initiated
Hardware Mode = Duplex
Configured Redundancy Mode = sso
Operating Redundancy Mode = sso
Maintenance Mode = Disabled
Communications = Up
multicast replication 커맨드 적용시 warning 메세지에서 나오는 대로 권장 커맨드를 적용하면 정상적으로 적용되지만
warning 메세지가 나온 커맨드를 그대로 적용해두면 redundancy 모드가 RPR 로 동작하게 된다.
커맨드가 조금 다른 부분이라 적용시 동작 자체는 그대로 동작하는지는 확인중. 그리고 적용후 reload나 switchover를 해주어야 정상적으로 redundancy mode가 올라온다.
